Cut and weld from one machine.
The front-panel process selector brings CUT, TIG and MMA into one power source. Each process uses its own working setup.
PLASMARGON CT-418 3-in-1 110V/220V Plasma Cutter Welder Combo Machine – 40A Plasma Cutter, 180A Pulse Lift TIG, 180A Stick (MMA) Welder, 2/5" Clean Cut, IGBT Digital Display
CT-418 Machine
$199.99 USD
Skip to product information
Out of stock
PLASMARGON
CT-418 Multi-Process Welder & Plasma Cutter
Plasma cutting, TIG welding and stick welding in one machine.
$199.99 USD
Taxes included.
Shipping calculated at checkout.
- Plasma / TIG / Stick (MMA)
- 110V / 220V dual voltage
- Model-specific product video
CT-418
GET TO KNOW YOUR MACHINE
Three processes. One workshop machine.
Switch between plasma cutting, TIG welding and stick welding with CT-418. Prepare the torch and supply for the process you choose.
Match the torch to the process.
A cutting torch, TIG torch and electrode holder serve different jobs. Use the correct connection and consumables for the selected process.
See CT-418 in action.
Watch the actual product demonstration below to get familiar with the machine before reviewing your setup.
THE ACTUAL MACHINE
See the actual machine.
Watch this model’s own product demonstration, then review the process and setup essentials below.
See what you need to get started ↓CT-418 product demonstration.
PREPARE FOR THE PROCESS
The right process needs the right setup.
Start with the power source, working attachment and process-specific supplies. Follow the complete instructions before making connections.
The setup essentials
- Welding / cutting process
- Plasma cutting / TIG / Stick (MMA)
- Input power
- 110V / 220V dual voltage
- Working setup
- Compressed air for cutting; suitable shielding gas for TIG; electrodes for stick welding.
Prepare your workspace
Read the machine’s instructions and prepare suitable eye, skin and hearing protection in a ventilated work area.
Confirm a grounded 110V or 220V electrical supply and a circuit suitable for the machine and task.
Match the torch or electrode holder, consumables and connections to the selected process.
Secure the workpiece, check the work connection and review the procedure before starting.
Prepare each process separately.
Plasma cutting
Prepare the matching plasma torch and consumables and an external compressed-air supply. Follow the machine’s air and electrical requirements.
TIG welding
Prepare the correct TIG torch, consumables and suitable shielding-gas supply. The plasma-cutting air supply is not a substitute for TIG shielding gas.
Stick / MMA welding
Prepare a suitable stick electrode, electrode holder and work clamp. Use the electrode and electrical setup specified for the job.
A FEW THINGS TO KNOW
Questions before you choose?
Is CT-418 a dedicated plasma cutter?
CT-418 is a multi-process welding and cutting machine. It combines plasma cutting, TIG welding and stick welding; choose the correct process and equipment for your task.
Does every process use the same torch?
No. Plasma cutting, TIG welding and stick welding use different working attachments and consumables. Match the torch or holder to the selected process.
Do all three processes use compressed air?
Compressed air is used for plasma cutting. TIG welding uses a suitable shielding-gas setup, while stick welding uses a matching electrode. Do not substitute a different gas or supply without the correct instructions.
Can I use 110V and 220V input?
Yes. This model supports 110V/220V input. The outlet, grounding and circuit must be appropriate for the machine. Have electrical installation questions checked by a qualified electrician.