Three processes, one unit
Move between plasma cutting, TIG welding and Stick / MMA welding as the project requires, using the equipment and setup for each process.
PLASMARGON 520TSCPF 3-in-1 Plasma Cutter, TIG & Stick (MMA) Welder Machine – 200A/180A/50A, 110V/220V Dual Voltage
$199.00 USD
Skip to product information
Out of stock
PLASMARGON
520TSCPF Multi-Process Welder & Plasma Cutter
One power source for plasma cutting, TIG welding and stick welding.
$199.00 USD
Taxes included.
Shipping calculated at checkout.
- Plasma / TIG / Stick (MMA)
- 110V / 220V dual voltage
- Model-specific product video
520TSCPF
MEET YOUR NEXT WORKSHOP TOOL
PLASMA CUT / TIG / STICKCut and weld from one workshop machine.
Choose 520TSCPF when your projects need plasma cutting, TIG welding and Stick / MMA welding from one unit. Plan the torch and external supplies for each process.
Reasons to choose this machine
A useful workshop combination
A practical choice when a project includes both cutting and welding. The product video shows the machine connections and process controls.
110V / 220V input
Match the machine to the available electrical supply and the requirements of the selected process. Output conditions depend on the input and operating setup.
Start with the processes your project needs.
Compare CT-418 for another CUT / TIG / MMA combination. For wire-fed welding, explore the MIG / Flux-core machines.
ORIGINAL PRODUCT DEMONSTRATION
Take a closer look at 520TSCPF.
Original 520TSCPF demonstration with torch connections and CUT, TIG and Stick / MMA segments.
520TSCPF product demonstration.
Jump to a moment
Choose a chapter to open that moment in the original video.
PLAN YOUR SETUP
Know what to prepare before it arrives.
Check the machine label, matching instructions and supplies for your chosen process before first use.
Power & workspace
110V / 220V dual-voltage input. Confirm the plug, circuit and electrical requirements for your exact machine. Use a suitable work area, ventilation and protective equipment.
For plasma cutting
Prepare a separate compressed-air source and suitable air hose. Use clean, dry air and the regulator setting specified for this exact model.
For TIG welding
Prepare an appropriate argon supply, regulator / flowmeter, gas hose and welding consumables for the material. A TIG torch alone is not a complete gas setup.
For Stick / MMA welding
Prepare suitable stick electrodes for the material and the machine settings. Stick welding does not require a shielding-gas cylinder.
Your preparation checklist
This checklist helps you plan supplies. Read the model manual and follow its setup and safety instructions before use.
UNBOX WITH CONFIDENCE
Supplied equipment and your own supplies.
Included with this machine
- 520TSCPF multi-process machine
- PT31 plasma cutting torch
- WP-17 TIG torch
- Electrode holder and work / ground clamp
- Starter PT31 and WP-17 torch accessories
- Air filter / regulator and air fittings
Prepare separately
- CUT: external compressed-air source and suitable hose
- TIG: appropriate argon supply, regulator / flowmeter, gas hose and welding consumables
- Stick / MMA: suitable welding electrodes
- Suitable power circuit, protective equipment and workspace
Match the shipment to your selected product and current packing list. The external air source and process supplies listed here are separate preparation items.
MATCH THE TORCH, THEN THE PART
Choose parts for the exact setup.
Start with the torch marking, then check the machine-end fittings and the consumable dimensions. A similar machine name alone does not confirm fit.
| Process | Torch / equipment family | What to match |
|---|---|---|
| Plasma cutting | PT31 | PT31 marking, tip / electrode dimensions, cup thread and current rating; for a complete torch, also confirm the air fitting and trigger connector. |
| TIG welding | WP-17 | WP-17 torch marking, collet / cup size, gas connection and machine connector. |
| Stick / MMA | Stick / MMA | Cable connector, holder rating and electrode size for your machine. |
Get a parts-fit check
Send your model, order number if available, torch marking, and clear photos of the torch head and machine-end connectors. We will help identify the matching part.
Questions before you choose.
What are the three main processes?
520TSCPF combines plasma cutting, TIG welding and Stick / MMA welding. Select the equipment and supplies for the process you plan to use.
Does TIG welding need shielding gas?
Yes. Prepare an appropriate argon supply, regulator / flowmeter and gas hose, together with the torch consumables and filler material required for your job. These process supplies are separate from the listed machine kit.
Which torch parts should I order?
Use the PT31 torch family for the cutting setup and WP-17 for the TIG setup, then match the connector, consumable dimensions and ratings to the supplied torch.
Where can I ask for the model instructions?
Use the model-specific support link below. Include 520TSCPF, your order number if available and a photo of the machine label so we can identify the correct instructions.
520TSCPF
Factory-backed help after purchase.
Contact our support team for troubleshooting. Technical support is provided remotely by the factory team; approved returns can be received at our U.S. warehouse. Return instructions and the approved address are provided after authorization.