Non-contact pilot arc
The Pro series uses a pilot arc to start without touching the torch to the workpiece.
PLASMARGON PLC65Pro 65A Non-Touch Pilot Arc Plasma Cutter Machine, 110V/220V Dual Voltage, P80 Torch, IGBT Inverter, Cuts 10mm / 20mm, CNC Compatible, LED Display for Workshop and DIY
PLC65Pro Machine
$189.99 USD
跳至产品信息
缺货
PLASMARGON
PLC65Pro Non-Contact Pilot Arc Plasma Cutter
Non-Contact Pilot Arc air plasma cutting with dual-voltage input.
$189.99 USD
已含税费。
结账时计算运费。
- Non-contact pilot arc
- 110V / 220V dual voltage
- Front air-pressure gauge
PLC65Pro
GET TO KNOW YOUR MACHINE
A non-contact start. A clear setup.
Meet PLC65Pro: non-contact pilot arc cutting, dual-voltage input and front-panel current control. Check the air, connections and correct model manual before your first cut.
Your controls, in view.
Adjust output with the current dial. Read the digital current display and check air pressure at the front-panel gauge.
Two input voltages.
Supports 110V and 220V input. Match the machine to a correctly grounded supply and a circuit suitable for the job.
BEFORE YOUR FIRST CUT
Get the setup right.
Power, air and protection come first. This checklist complements the complete instructions in your manual.
The setup essentials
- Process
- Air plasma cutting
- Arc start
- Non-contact pilot arc
- Input power
- 110V / 220V dual voltage
- Cutting gas
- Compressed air · external supply
- Air pressure
- 60 PSI recommended · 50–80 PSI acceptable
- Front controls
- Current adjustment, current display & air pressure gauge
Prepare your workspace
Read the safety and connection instructions. Use appropriate eye, skin and hearing protection in a ventilated work area.
Confirm a suitable, grounded 110V or 220V supply. Have electrical installation questions checked by a qualified electrician.
Provide a clean compressed-air supply. Check the regulator and pressure against the manual before use.
Connect the torch and work clamp as instructed. Check the consumables and secure the workpiece before starting.
YOUR MACHINE & CONNECTIONS
Know the pieces before you begin.
The core setup brings the machine, torch, work clamp and air regulation together.
Plasma cutter
The machine and its front-panel controls.
Cutting torch
The handheld torch connects at the machine’s front panel.
Work clamp
The return lead connects the machine to the workpiece.
Air regulator / filter
The air connection and regulator prepare the compressed-air supply.
An external compressed-air supply, suitable electrical circuit and personal protective equipment are needed for operation.
A FEW THINGS TO KNOW
Questions before your first cut?
Do I need an air compressor?
Yes. This is an air plasma cutter and needs an external compressed-air supply. The manual specifies 50–80 PSI, with 60 PSI recommended. Use compressed air only.
Can I use 110V and 220V power?
Yes. This model supports 110V/220V input. The outlet, grounding and circuit must be suitable for the machine; have electrical installation checked by a qualified electrician when needed.
What is the difference between X and Pro?
PLC55X and PLC65X are contact-start models. PLC55Pro and PLC65Pro use a non-contact pilot arc. Match your operating method and torch setup to the correct model’s manual.
Where can I find the connection instructions?
Open the English manual below for torch assembly, front controls, air-regulator connections, safety information and troubleshooting.
How does after-sales support work?
Send your model, order details and a description of the issue. Our factory provides remote technical support. Approved returns are directed to our U.S. return location; request authorization before shipping equipment back.
Read the limited warranty ↗How do I choose a replacement torch or consumables?
Match your exact machine and torch marking, machine-end connector, trigger connection and start system. For consumables, compare the part number, shape and dimensions. Send these details to support for a fit check before ordering.
Compare X and Pro for your setup
Start with the arc-start method, then check the air supply, electrical setup, current price and the guide for each model.
Swipe or scroll sideways to compare the models.
| What to check |  PLC50X |  PLC55X |  PLC65X |  PLC55Pro |  PLC65Pro |
|---|---|---|---|---|---|
| Arc start | Contact start | Contact start | Contact start | Non-contact pilot arc | Non-contact pilot arc |
| Input power | 110V / 220V dual voltage | 110V / 220V dual voltage | 110V / 220V dual voltage | 110V / 220V dual voltage | 110V / 220V dual voltage |
| Air supply | Compressed air · external supply | Compressed air · external supply | Compressed air · external supply | Compressed air · external supply | Compressed air · external supply |
| Air pressure | 请核对本型号的操作说明 | 60 PSI recommended · 50–80 PSI acceptable | 60 PSI recommended · 50–80 PSI acceptable | 60 PSI recommended · 50–80 PSI acceptable | 60 PSI recommended · 50–80 PSI acceptable |
| See the setup | Read setup guide ↗ | Watch product demo ↗ | Watch product demo ↗ | Watch product demo ↗ | Read setup guide ↗ |
| English manual | 查看本型号设置指南 ↗ | Open matching PDF ↗ | Open matching PDF ↗ | Open matching PDF ↗ | Open matching PDF ↗ |
| Current price | $104.99 USD | $140.00 USD | $158.80 USD | $149.99 USD | $189.99 USD |
| Explore the model | View model ↗ | View model ↗ | View model ↗ | View model ↗ | View model ↗ |
PLC50X, PLC55X and PLC65X use contact start. PLC55Pro and PLC65Pro use a non-contact pilot arc. These cutters require an external compressed-air supply. Select the torch and instructions for your exact model.
Choosing between two models?
Tell us the material, thickness, available power and air supply. We can help review the setup before you choose.
Need a hand with your setup?
U.S. return handling. Remote technical support from our factory.