YOUR PROJECT, YOUR PROCESS

Find the machine for your kind of project.

Start with the work you want to do. Then compare real machines, watch the matching demonstration and prepare the right setup.

YOUR STARTING POINT

Explore the machine range.

These are real products from our range. Check the exact product page and instructions before ordering.

All plasma cutters ↗All welding machines ↗Setup and parts guides ↗
KNOW BEFORE YOU BUY

A clearer path to your setup.

Four quick checks that help you compare machines and prepare the right equipment list.

Know your input power. The right machine starts with the power available in your workspace. Read the checklistClose checklist

Three things to check

  • Read the listed input voltage for the exact model.
  • Check the plug type and circuit requirements in the model manual.
  • Check whether the available output differs between supported input voltages.

A dual-voltage label does not mean the same output is available on every outlet.

Find resources for my model
Plan your air supply. For plasma cutting, check what the exact model requires from your air setup. Read the checklistClose checklist

Before choosing a cutter

  • Confirm whether the selected cutter needs an external air supply.
  • Match the specified air pressure and flow requirements to your compressor.
  • Check required fittings and the manual's air-quality guidance.

Do not assume a compressor, filter or fitting is included. Check the packing list.

Find resources for my model
Read the packing list. See which accessories arrive with the machine and which you need to add. Read the checklistClose checklist

Build your equipment list

  • Review the exact variant's included torch, leads and accessories.
  • Check which process-specific supplies are required for your intended use.
  • Check the manual and included-items list before buying extras.

Product photos can show accessories separately. Use the written packing list for confirmation.

Find resources for my model
Match parts precisely. Choose replacement parts by the machine, torch and part number. Read the checklistClose checklist

Have these details ready

  • Identify your machine model and torch model.
  • Compare the part number, dimensions and connection with the listing.
  • If anything is unclear, ask support with model details and a photo before ordering.

Parts from similar-looking torches may have different fits. Appearance alone is not a compatibility check.

Check parts fit

For exact specifications and setup requirements, use the product page and the manual for your machine model.
TORCHES / PARTS / CONSUMABLESExample plasma torch consumable componentsThe right fit starts with the exact model.
KEEP YOUR SETUP READY

Small parts.
A better match.

Torches, electrodes and nozzles are model-specific. A few details help you find the right starting point.

  1. 01
    Start with your machine

    Keep the exact model and variant handy.

  2. 02
    Match the torch and connection

    Check torch series, connector and part number.

  3. 03
    Confirm the listing

    Review the stated compatible models before ordering.
Browse parts Ask about compatibility